Tankers
Stationary and mobile tanks — flat-end or dish-end — from 1,000 to 100,000 litres.
We've delivered over 4,000 tankers across capacities and applications — from vertical stationary tanks to trailer-mounted mobile storage up to 50,000 litres. Built flat-end or dish-end to suit storage, movement between sites, and the testing of large pumps.
Typical builds
- Stainless steel or mild steel construction
- Vertical-mounted stationary tanks
- Movable storage tanks on castor-wheeled saddles
- Pressure vessels up to 100,000 L capacity
- Trailer-mounted mobile storage up to 50,000 L
- Trailer-mounted tanks of 24 KL & 15 KL
- Trailer-mounted tanks from 1,000 L
Gallery
Where our tankers are in service.
See how we configure this range for each sector.
Before you enquire.
What capacities can you build?
Tankers range from 1,000 to 100,000 litres; UL-listed fuel tanks from 60 to 40,000 USG, in both stainless and mild steel.Do you build fully customized units?
Yes — trailers, tankers and pressure vessels are engineered to your brief, from compressor-mounted trailers to bespoke pressure-transmitting vessels.
Corrosion is designed out, not painted over.
Structural steel members are painted, while machine components, bolts, nuts and washers are electro- or spray-galvanized.
Paint thickness is measured at random locations selected by the purchaser's representative, in their presence. Primers and paints are procured only from approved manufacturers.
Painting scheme
- 01
Surface preparation
Surfaces made completely free of oil, grease, dirt, dust and other matter before primer.
- 02
Primer — 2 coats epoxy
Applied immediately after dust removal. Dry film thickness not less than 30 microns.
- 03
Finish — 2 coats
40 microns DFT epoxy / polyurethane colour paint.
- 04
Verification
Thickness measured at random locations chosen by the purchaser’s representative.
